Features and Benefits

LOCTITE 3092 is a 2-component, fast fixturing, gap-filling cyanoacrylate adhesive that works well on various substrates including most plastics, rubbers and metals.
LOCTITE® 3092™ two-component cyanoacrylate adhesive is designed for the assembly of parts with varying or undefined bond gaps up to 5 mm (0.2 in), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. LOCTITE 3092 is also suited to bonding porous materials such as wood, paper, leather and fabric. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the kit).
  • Temperature resistance from -40 to +80 °C
  • Gap filling up to 0.2 in (5 mm)
  • Gel consistency prevents adhesive flow, even on vertical surfaces
  • Excellent bonding of all common substrates (metals, most plastics, rubber, wood, paper, ...)
  • Precise and clean application with the syringe
  • Perfect for all quick repairs of broken plastic parts and all types of emergency repair
Read More

Documents and Downloads

Technical Information

Application method, Recommended Manual
Applications, Recommended Bonding Plastic, Bonding Rubber
Key characteristics, Recommended Fixture: Very Fast Fixture, Gap Filling, Sag: Non-Sag

How to

Step by Step Guide

1. Preparation - Cleaning

It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7070™) to degrease and clean surfaces prior to applying the adhesive.

2. Preparation of Cartridge

Place plunger in the back of the cartridge. Remove cap from cartridge. Dispense a small amount so that material is coming out of both sides. Attach mix nozzle and dispense a bead at least half of the length of the nozzle. The material is ready to use.

3. Application

Apply a bead of material to one of the surfaces to be bonded. Join the parts and fixture in a way to prevent movement of the part until handling strength is obtained.

4. Assembly

Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452™. Spray or drop activator onto excess product.

Frequently Asked Questions