The Henkel LOCTITE PURBOND adhesives for North America serve a huge market of engineered wood. Our products are exclusively designed for the use in this region, with all its requirements for environment, health and reliability in bonding results.

To assure the safe and professional use of our adhesives systems, we provide our customers with accessories that have been tested by the Center of Competence and that are specific to LOCTITE PURBOND products:

LOCTITE SOLVENT PURBOND

• With Henkel’s LOCTITE SOLVENT PURBOND, equipment and machine parts can be easily cleaned. By immerging the contaminated parts into the solvent bath, remains of adhesives can be easily removed from components

LOCTITE RELEASE AGENT PURBOND

• The LOCTITE RELEASE AGENT PURBOND prevents from mess of equipment and tools by obviating adherent effects on the surface. By simple and continuous application adhesive residues can be easily removed. The use of Henkel’s Release Agent is recommended in order to extend the lifetime of your machinery.

LOCTITE RELEASE PASTE PURBOND

• The undesired adhesion between fittings and threaded joints will be avoided with Henkel’s LOCTITE RELEASE PASTE PURBOND. Already applied in small portions, it helps to optimize your production processes.

LOCTITE BARRAGE AGENT PURBOND

• The LOCTITE BARRAGE AGENT PURBOND improves the protection against moisture and helps to prevent the reaction of 1-component PUR adhesive within a closed application system. Used by equipment suppliers, it should be flushed through pumps, valves, fitting and piping parts before the commissioning with adhesives.

The LOCTITE HB E PURBOND product line is approved for use under AITC 405-2008 and CSA 0112.10. This allows the adhesive to be used for glulam manufacture under the requirements of ANSI/AITC A190.1-2007 in the USA and CLT in both Canada and the USA.

LOCTITE HB E032 PURBOND was tested acc. to ASTM E119 and meets the fire test requirements of the Elevated-Temperature Adhesive Qualification Procedure for HRA Finger Jointed lumber, Method A (ASTM7374-08), acc. to ALSC (American Lumber Standards Committee), Section 1.4.2. As well as ANSI 405-2008, including ASTM D2559.