LOCTITE® 454 Instant Adhesive

Known as LOCTITE 454 Prism Instant Adhesive Gel

Features and Benefits

LOCTITE 454 is a general purpose, non-drip gel, instant adhesive that is ideal for vertical surfaces and overhead applications.
LOCTITE® 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. LOCTITE 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.
  • Universal instant adhesive gel
  • Perfect for all quick repairs
  • Ideal for overhead application and vertical faces
  • Bonds similar or dissimilar substrate combinations of wood, metals, ceramics, most plastics
  • Non-wicking, specially suited to porous materials
  • Will not drip or run
Read More

Technical Information

Application method Dispense System, Manual
Applications Overhead/Vertical Application, Repairing
Color Clear
Cure type Moisture Cure
Fixture time, Steel 45.0 sec.
Gap fill 0.25 mm
Key characteristics Fixture: Fast Fixture, General Purpose, Tensile Strength: High Tensile Strength, Viscosity: High Viscosity
Operating temperature -40.0 - 120.0 °C (-40.0 - 250.0 °F )
Physical form Gel
Recommended for use with Elastomer, Metal, Plastic, Porous Surface
Shear strength, Mild Steel (grit blasted) 20.9 N/mm² (3030.0 psi )

How to

Step by Step Guide

1. Preparation - Cleaning

It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7063 or SF 7070) to degrease and clean surfaces prior to applying the adhesive.

2. Preparation - Priming

To improve adhesion on difficult to bond plastic surfaces, apply LOCTITE® SF 770 to the bond area by brushing or dipping. Avoid applying excess primer. Allow the primer to dry.

3. Preparation - Activation

If cure speed is too slow, use appropriate activator LOCTITE® SF 7452 or LOCTITE® SF 7455 (see cure speed vs activator graph in TDS). Apply activator to one bond surface by spray, brush or dipping (not primed surfaces). Allow the activator to dry.

4. Application

Apply adhesive onto one side/part.

5. Assembly

Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured. Hint: if necessary, excess product can be cured by activator LOCTITE® SF 7452 or LOCTITE® SF 7455. Spray or drop activator onto excess product.

Equipment

For precise dispensing of small amounts of adhesive, the use of dispensing needles is recommended.

Frequently Asked Questions