LOCTITE® HY 4070

Features and Benefits

LOCTITE HY 4070 is a 2-component, fast fixturing, cyanoacrylate/acrylic hybrid adhesive that works well on various substrates including most plastics, rubbers and metals.
LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. HY 4070 is ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).
  • Fast fixturing
  • Moisture resistant
  • Temperature resistance from -40 to +100°C
  • Gap filling up to 0.2 in (5 mm)
  • Gel consistency prevents adhesive flow, even on vertical surfaces.
  • Excellent bonding characteristics to a variety of substrates including plastics, rubbers, and metals
Read More

Documents and Downloads

Safety Data Sheets and RoHs
LOCTITE® HY 4070, 11 g Twin (Dual) Cartridge 2143579 en-NZ
IDH: 2143579
EAN: 4058093007228

Size Case: Twin (Dual) Cartridge

Quantity: 10.0/case

No documents found

Technical Information

Application method Dispense system
Applications Bonding dissimilar materials, Bonding plastic, Bonding rubber, Construction, Direct bonding, Edge bonding, Interior repairs, Structural bonding
Cure type Room temperature (ambient) cure, Two component mix
FEA (finite element analysis) Finite strain, Viscoelastic
Fixture time, Aluminium (etched) 0.5mm gap <60.0 sec.
Gap fill 5.0 mm
Mix ratio, by volume 10 : 1
Number of components 2 part
Physical form Gel
Recommended for use with Composite, Composite: advanced composites, Dry surface, Elastomer: highly filled elastomer, Epoxy, Fiberboard, Gel coat, Laminate, Metal, Non-gel coat, Painted surface, Phenolic, Plastic, Rubber, Thermoplastic, Thermoset, Urethane: cast urethane, Vinyl, Wood
Shear strength, Steel (grit blasted) 25.0 N/mm² (3625.0 psi )
Mixed
Key characteristics, Mixed Cure speed: ultra fast cure, Gap filling, Moisture resistant, Multipurpose
Operating temperature, Mixed -40.0 - 100.0 °C (-40.0 - 212.0 °F )
Resin
Casson viscosity, cone & plate, Resin @ 25.0 °C 200.0 - 1300.0 mPa·s (cP)
Colour, Resin Yellow
Hardener
Colour, Hardener Clear
Viscosity, cone & plate, Hardener @ 25.0 °C Shear Rate 1,000 s⁻¹ 1.0 - 30.0 mPa·s (cP)