LOCTITE 55
Iezīmes un ieguvumi
- Plaša pielietojuma vītņotu cauruļu un savienojuma elementu blīvēšanas līdzeklis
- Necietējošs, tūlītējs pilna spiediena blīvējums
- Ātrai, vienkāršai un uzticamai blīvēšanai
- DVGW/KTW apstiprinājums lietošanai ar gāzes un dzeramā ūdens caurulēm
- Testēts atbilstoši EN 751-2 ARp kategorijas un DIN 30660 prasībām
- Sertificēts NSF/ ANSI, 61. standarts
Dokumenti un lejupielādes
Meklējat TDL vai DDL citā valodā?
Tehniskā informācija
Aģentūru apstiprinājumi / Specifikācijas | DVGW, KTW, NSF |
Krāsa | Balta |
Kā rīkoties
Pakāpeniski norādījumi
1. 1. Preparation
Cleaning: Clean threads if necessary and roughen smooth threads.
2. 2. Application
Wind the cord onto the pipe thread in the same direction as the thread, starting from the end of the pipe. Apply in a criss-fross manner. For recommended number of wraps, see label. Cut the cord with the integrated cutting tool at the top of the tube.
3. 3. Assembly
Assemble using accepted trade practices. Adjustment of 45° is possible after tightening.
4. Which products can be used on metals / plastics?
Metals: all mentioned adhesives but with varying performance characteristics. Plastics: all adhesives other than anaerobic adhesives – recommend silicones, LOCTITE® 55 or other technologies (i.e. CAs) depending on application.
5. Which thread sealants can be used on oxygen systems?
Care must be taken when using adhesives on pure oxygen systems. LOCTITE® 577 has BAM® approval and can be considered. For non-pure systems, any adhesive that is compatible with the selected fittings and operating conditions can be considered.