LOCTITE® ABLESTIK 8006NS

Features and Benefits

LOCTITE ABLESTIK 8006NS, Epoxy, Non-conductive, Die Attach Adhesive
LOCTITE® ABLESTIK 8006NS non-conductive die attach adhesive has been formulated for use in high throughput die attach applications. This product is designed for application by stencil or screen printing. This material can be applied to a wafer backside by stencil printing and then B-staged in an oven. Once B-staged, this adhesive remains stable and can be placed into storage for several months. With proper die bonder setup along with incorporating adequate die placement pressure, a consistent minimum bondline thickness of 1mil can be achieved with minimal die tilt.
Read More

Technical Information

Application method Dispense system
Applications Die attach
Color White
Cure schedule, @ 160.0 °C 2.0 hr.
Cure type Heat cure
Extractable ionic content, Chloride (CI-) 14.0 ppm
Extractable ionic content, Potassium (K+) 9.0 ppm
Extractable ionic content, Sodium (Na+) 9.0 ppm
Filler type Alumina/Silica
Key characteristics Conductivity: electrically non-conductive, Printable, Screen printable
Number of components 1 part
Physical form Paste
RT die shear strength, 2 x 2 mm Si die on ceramic 13.0 kg-f
Tensile modulus, @ 150.0 °C 1196.0 N/mm² (176400.0 psi )
Thermal conductivity 0.44 W/mK
Thixotropic index 1.3
Viscosity, Brookfield CP51, @ 25.0 °C Speed 5 rpm 55000.0 mPa·s (cP)
Volume resistivity 0.43x10¹⁴ Ohm cm