BONDERITE M-CR 1132 AERO

Terkenal sebagai ALODINE 1132 TOUCH-N-PREP

fitur dan keuntungan

Available sizes:

Unduh TDS
BONDERITE M-CR 1132 AERO, metal pre-treatment
BONDERITE® M-CR 1132 AERO pen is designed to save labor, material, and time when applying a dry-inplace military specification approved chromate conversion coating for touch-up applications. Its proper use also reduces worker contact to chromating solutions and waste, such as rinse water generated from a chromating process. Before starting the application procedure it is necessary to become familiar with the mechanics of the pen itself.
  • Easy to use, cost-effective touch-up and repair applicator that is designed to save labor, material, and time.
  • Only non-rinsing, dry-in-place technology available, allowing treatment without the need for rinsing with water
  • Provides excellent paint adhesion and painted corrosion resistance
  • Contains sufficient solution to treat up to 50 sq. ft. (4.6 sq. m)
Baca selengkapnya

Dokumen dan Unduhan

Keamanan Lembar Data dan RoHs
BONDERITE M-CR 1132 AERO 1445846 id-ID
IDH: 1445846

Ukuran kasus: ea Kotak

Kuantitas: 12.0/kasus

Dokumen tidak ditemukan

Informasi Teknis

Metode Aplikasi Pencelupan

Cara

Panduan Langkah demi Langkah

1. Remove

Remove the cap

2. Change

Remove the existing tip

3. Replace

Insert replacement tip.

4. Hold

Holding the Touch-N-Prep® pen upright, press and hold the pen tip down on the surface.

5. Apply

Apply BONDERITE® pen solution to the aluminum surface.

6. Discard

Discard the replacement tip after use and cap the Touch-N-Prep

Pertanyaan Umum