LOCTITE® STYCAST ES 1904
Značajke i prednosti
LOCTITE STYCAST ES 1904, Epoxy, Potting and Encapsulating
LOCTITE® STYCAST ES 1904 is an opaque, medium-viscosity epoxy resin formulation recommended for small potting and laminating applications, excellent structural, mechanical and electrical properties are required. This two-part adhesive exhibits good wetting, cures at room temperature and develops strong, low shrinkage bonds to most materials including optical fibers, glass ceramics, most metals. It has excellent dimensional stability over a wide temperature range. This product is typically used in applications with an operating range of -60 °C to +125 °C.
Dodatne informacije
Dokumenti i preuzimanja
Tražite list s tehničkim podacima ili list sa sigurnosnim podacima na drugom jeziku?
Tehnički podaci
Boja | Neprozirna |
Broj komponenti | 2 dijela |
Coefficient of thermal expansion (CTE), Above Tg | 190.0 ppm/°C |
Coefficient of thermal expansion (CTE), Below Tg | 68.0 ppm/°C |
Omjer miješanja prema težini | 100 : 46 |
Omjer miješanja prema volumenu | 2 : 1 |
Primjene | Učahureno |
Temperatura prelaska u staklo (Tg) | 80.0 °C |
Tip stvrdnjavanja | Stvrdnjavanje na sobnoj temperaturi (okoline) |
Tvrdoća prema Shoreu, Shore D | 90.0 |
Miješano | |
Vijek trajanja spremnika, Miješano @ 25.0 °C 100 g mass | 8.0 - 10.0 min. |
Učvršćivač | |
Gustoća, Učvršćivač @ 25.0 °C | 1.09 g/cm³ |
Viskoznost, Učvršćivač @ 25.0 °C | 50000.0 mPa.s (cP) |
Smola | |
Gustoća, Smola @ 25.0 °C | 1.19 g/cm³ |
Viskoznost, Smola @ 25.0 °C | 25000.0 mPa.s (cP) |