LOCTITE® DRI 503

Caractéristiques et avantages

This low viscosity, thixotropic thread sealant used for bulk processing applications can be roll-coated or flow-coated onto the threads. Perfect for applications where readjustments may be required.
For bulk-processing applications, try LOCTITE® DRI 503. This non-toxic, pre-applied, water-based thread sealant is perfect for roll-coated or flow-coated bulk processing applications. When convection oven dried, it becomes a resilient, tight-clinging, non-curing sealant for tapered or straight threads. It's particularly ideal where re-adjustments are required, e.g. rear axle filler plugs, bearing adjuster nuts, pressure gauges and sensors, brake fittings, pipe fittings, and compressor pipe plugs. It is also perfect for cable connectors, screws for plastic assemblies, adjustment screws, overhead fire sprinklers, shower heads, and door closure hardware. Good for applications with an operating range of -54°C to 150°C (-65°F to 302°F).
En savoir plus

Informations techniques

Applications Étanchéité filetée
Caractéristiques clés Thixotrope
Couleur Blanchâtre
Forme physique Liquide
Nombre de composants Mono composant