BONDERITE M-CR 871 AERO

Conocido como ALODINE 871

Características y Ventajas

Tamaños disponibles

12 u Caja

12.0/caso
Descarga de TDS
BONDERITE M-CR 871, metal pre-treatment
BONDERITE® M-CR 871 (known as ALODINE 871 TOUCH-N-PREP) Coating is a non-hexavalent chromium dry-inplace conversion coating designed for use on aluminum and its alloys. The applicator used to deliver this product provides an easy and safe method of repairing bare areas of aluminum surfaces.
  • Easy to use, cost-effective touch-up and repair applicator that is designed to save labor, material, and time
  • Provides excellent paint adhesion and painted corrosion resistance
  • Only non-rinsing, dry-in-place technology available, allowing treatment without the need for rinsing with water
  • Contains sufficient solution to treat up to 50 sq. ft. (4.6 sq. m)
Leer más

Documentos y Descargas

Hoja de Datos Técnicos
BONDERITE M-CR 871
Descargar TDS

¿Quieres las Hojas de Datos Técnicos o las Fichas de Seguridad en otro idioma?

Busca Hojas de Datos Técnicos en otro idioma
Busca Fichas de Seguridad en otro idioma

Documentos adicionales

Brochure: Ready-to-Use Surface Treatments
Descargar documento

Español

Brochure: Touch-N-Prep Coating - Bonderite M-CR 871/1132
Descargar documento

Español

Flyer: Bonderite Touch-N-Prep Pen Tips
Descargar documento

Español

Instrucciones

Instrucciones paso a paso

1. Remove

Remove the cap

2. Change

Remove the existing tip

3. Replace

Insert replacement tip

4. Hold

Holding the Touch-N-Prep® pen upright, press and hold the pen tip down on the surface.

5. Apply

Apply BONDERITE® pen solution to the aluminum surface.

6. Discard

Discard the replacement tip after use and cap the Touch-N-Prep®.

Preguntas frecuentes