LOCTITE® EA 3471
Known as LOCTITE 3471
Features and Benefits
Available sizes:
Two-part, non-sagging, steel-reinforced epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Easy to apply with no need for heating or welding.
If you need a repair putty with a truly metal-like finish, try LOCTITE® EA 3471. This 2-part, non-sagging epoxy putty is easy to apply with no need for heating or welding, and can be machined, drilled, tapped or filed. It’s perfect for repairing non-structural defects in castings; making jigs and fixtures; sealing vessels, tanks and valves; resurfacing worn air seals, and filling cavitated areas. You can rely on an operating temperature range of -30°C to 105°C (-22°F to 221°F).
- Cures to a metal-like finish
- Superior adhesion on metal surfaces
- Bonds well to all metal substrates
- Won't sag or shrink
- Rebuilds worn parts fast
Documents and Downloads
Safety Data Sheets and RoHs
- 500 g Mixed - IDH 478272
LOCTITE® EA 3471, 500 g Mixed 478272 en-ES
IDH:
478272
EAN:
5010266373447
Size Case: 500 g Mixed
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Fixture time | 180.0 min. |
| Mix ratio, by volume | 1 : 1 |
| Shear strength | 20.0 N/mm² |
| Work life | 45.0 min. |
Where to Buy
Buy Online
LOCTITE® EA 3471
Two-part, non-sagging, steel-reinforced epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Easy to apply with no need for heating or welding.
- 500 g Mixed - IDH 478272
Buy Nearby
Use our distributor locator to find your nearest store.
* Contact the distributor to confirm that the selected product is in stock.
Go To distributor locatorLOCTITE® EA 3471
Two-part, non-sagging, steel-reinforced epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Easy to apply with no need for heating or welding.