LOCTITE® 248
Features and Benefits
Available sizes:
LOCTITE 248 is a blue, medium strength threadlocking adhesive in a non-drip, easy-to-apply stick form. It is suitable for all metal threaded assemblies.
LOCTITE® 248 is a blue, general purpose threadlocker that provides a medium strength bond in a convenient stick format for no-drip, no-mess applications. This threadlocker locks and seals bolts, nuts and studs to prevent loosening due to vibration. It works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces without the need for a primer. Suitable for use on most oil-coated, "as-received" fasteners without cleaning.
- Convenient stick format prevents dripping
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) without primer
- Suitable for use on most oil-coated, "as-received" fasteners without cleaning
- Permits disassembly with ordinary hand tools for easy service and maintenance
Documents and Downloads
Safety Data Sheets and RoHs
- Stick 5.0/case - IDH 462476
- Stick 10.0/case - IDH 826034
LOCTITE® 248, 19 g Stick 462476 en-CA
IDH:
462476
EAN:
079340370876
Size Case: Stick
Quantity: 5.0/case
No documents found
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Swipe |
| Application temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
| Applications | Threadlocking |
| Breakaway torque, Breakloose torque, M10 Steel Nuts/Bolts | 23.0 N·m (200.0 in./lb. ) |
| Color | Blue |
| Cure type | Anaerobic cure |
| Fixture time | 5.0 min. |
| Key characteristics | Disassembly: removable, Strength: medium strength |
| Physical form | Semi-solid stick |
| Recommended for use with | Metal, Metal: passive metal |
How to
Step by Step Guide
1. Preparation - Cleaning
LOCTITE 248 is suitable for use on most “as-received” fasteners with light coatings of corrosion prevention oils without cleaning. However, for heavily oiled or contaminated fasteners, it is recommended to use LOCTITE® SF 7070™ to degrease and clean surfaces prior to applying LOCTITE 248 threadlocker.
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use LOCTITE SF 7649 activator. Allow to dry.
3a. Application - Through Hole
Apply a 360 degree band of threadlocker to the male fastener at the area of engagement and completely fill the thread roots - generally the width of 2-3 threads. Assemble nut and tighten to proper torque.
3b. Application - Blind Hole
Apply threadlocker to entire diameter of thread engagement area on male fastener, install fastener into blind hole, and tighten to proper torque.
4. Assembly
Assemble and tighten to proper torque requirement. If several bolts are being assembled, torque them down to the correct value within the fixture time window.
5. Disassembly
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 500°F/260°C and disassemble while hot.
LOCTITE® 248
LOCTITE 248 is a blue, medium strength threadlocking adhesive in a non-drip, easy-to-apply stick form. It is suitable for all metal threaded assemblies.