LOCTITE® PC 7332 Nordbak Wear Prevention Coating Nordbak® Wear Prevention Coating
Features and Benefits
Designed to protect, rebuild and repair processing equipment subjected to severe erosion and abrasion.
LOCTITE® PC 7332 Nordbak Wear Prevention Coating is a high performance, wet and dry abrasion resistant epoxy resin system. It is designed to protect, rebuild and repair high wear areas of processing equipment, such as desulfurization pumps and ducts, slurry pumps and pipes and slag granulation pumps which are subjected to severe wet abrasion. It can also be used for particle abrasion under dry conditions in transport elbows, chutes and other equipment. It is trowelable, non-sagging and requires no additional tooling.
Read More
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
Application method | Trowel |
Applications | Protective coating |
Colour | Grey |
Cure type | Room temperature (ambient) cure, Two component mix |
Key characteristics | Chemical resistant, Erosion resistance: High, Sag: non-sag |
Mix ratio, by volume | 4:1 |
Mix ratio, by weight | 4:1 |
Operating temperature | <120.0 °C (248.0 °F ) |
Physical form | Paste |
Recommended for use with | Metal |
Shore hardness | 85.0 |
Work life | 30.0 min. |