A  B  C  D  F  G  H  I  M  N  O  P  R  S  T 
Peel strength

The resistance of an adhesive to forces acting on the glued surface at an angle of separation of 180 degrees.


Gluing plastics can be a real challenge because of the huge number of different types of plastic and their microscopically smooth surfaces.
Here too, Henkel can offer you the best possible solutions.

Pressure-sensitive adhesive

Permanently slightly sticky polymer which adheres immediately to most solid surfaces under light pressure. Widely used for adhesive tape.


To achieve the best results when gluing, the substrates must be clean and free of grease. We recommend cleaning them with acetone or methylated spirit. Very smooth surfaces will adhere better if they are first lightly roughened e.g. with sandpaper. Please note the instructions on the packaging of our glues.