Approvals


Europe

LOCTITE PURBOND adhesives are tested to EN 301 / EN 302, DIN 68141, EN 15425 / EN 15416 and EN 14080, Annex C, classified as Type I adhesives and approved nationally for use in the production of load-bearing engineered wood products under EN 14080 and EN 386 (glue laminated timber) and EN 385 (finger-jointed structural timber). LOCTITE PURBOND adhesives are approved for the production of engineered wood products under DIN 1052 and Eurocode 5.

North America

The LOCTITE HB E PURBOND product line is approved for use under AITC 405-2008. This allows the adhesive to be used for glulam manufacture under the requirements of ANSI/AITC A190.1-2007.

LOCTITE HB E032 PURBOND was tested acc. to ASTM E119 and meets the fire test requirements of the Elevated-Temperature Adhesive Qualification Procedure, Method A, acc. to ALSC (American Lumber Standards Committee), Section 1.4.2.

South America

The LOCTITE HB S PURBOND product line is approved for the production of engineered wood products according to the relevant European standards and meets the requirements of the Chilean standard NCh 2148 and the Argentinean standard IRAM 45055.

Japan

LOCTITE HB 514 PURBOND is approved in Japan for structural finger-jointing, Condition C, in accordance with MAFF Notification 1152, dated September 2007.

Australia / New Zealand

Standards Australia is implementing a performance-based adhesive standard. The current Interim-Standard AS/NZS 4364(Int):2007 expired in 2009. The intention is to replace the old prescriptive AS/NZS 4364:1996. LOCTITE HB S PURBOND line products are fully tested in accordance to AS/NZS 4364:1996 and AS/NZS 4364(Int):2007 and are compliant with all requirements.

China

LOCTITE PURBOND adhesives are tested to EN 301 / EN 302, DIN 68141, EN 15425 / EN 15416 and EN 14080, Annex C, classified as Type I adhesives and approved nationally for use in the production of load-bearing engineered wood products under EN 14080 and EN 386 (glue laminated timber) and EN 385 (finger-jointed structural timber). PURBOND adhesives are approved for the production of engineered wood products under DIN 1052 and Eurocode 5.

South Africa

LOCTITE HB PURBOND adhesives offered in South Africa meet SANS 1349 requirements for Exposure Class 1 and are certified for the production of engineered wood products.

Contact us

Ask our experts on detailed information about LOCTITE PURBOND solutions.

Media & Downloads

Brochures and technical information on LOCTITE PURBOND.