04/07/2010, Irvine, California


Loctite PowerstrateXtreme Printable from Henkel Raises the Bar on Thermal Management Flexibility

Addressing the challenges posed by traditional greases and phase-change thermal interface materials, Henkel has developed and commercialized Loctite PowerstrateXtreme Printable (PSX-P), a new print-friendly thermal management product.

Delivering unprecedented process flexibility, Loctite PSX-P allows for thermal management materials to be deposited using traditional screen and stencil printing methodologies and is offered in both medium dry and extended dry version to accommodate varying manufacturing conditions and requirements. The reliability and performance of PSX-P is consistent with that of Loctite PowerstrateXtreme phase-change films but its paste format enables the material thickness to be adjusted as required.

“Traditionally, phase-change materials have been supplied in film formats,” explains Henkel’s Jason Brandi, Global Product Manager for TIM Films and Advanced Materials. “And, while films do come in a variety of thicknesses, thinner films are difficult to manufacture and even more problematic from a handling point of view. Loctite PSX-P resolves these issues.”

But, it’s not just phase-change films that pose challenges; thermal greases, the most common thermal management products, also have drawbacks. Greases are very messy in a production environment and are limited in terms of their ability to be automated. In addition, these products tend to migrate or pump out over time which ultimately reduces their heat transfer capability. Loctite PSX-P is applied as a paste and, once dry, yields a phase- change pad, thereby eliminating any grease-like pump out concerns.

Manufacturers can also rest assured that Loctite PSX-P has been formulated with production floor adaptability in mind. While alternative materials dry quickly and may cause significant machine downtime, Loctite PSX-P’s extended dry formula delivers an abandon time of two hours minimum, giving production specialists significant manufacturing flexibility. What’s more, the paste format of the material is ideal for high-speed or high-mix environments and can dramatically enhance throughput.

“PSX-P is the only commercially available printable phase-change material that is suitable for long-shift printing,” adds Brandi. “This, combined with its performance, reliability and ease of use make it the ultimate thermal management solution.”

Other proven advantages of PSX-P include its adaptability to deviations in surface flatness with the ability to fill any voids with varying thicknesses, simplified handling due to its room temperature dry state and improved reliability through the elimination of material migration or pump out issues.

For more information on Loctite PowerstrateXtreme Printable or any of Henkel’s advanced thermal management materials, call the company headquarters at 1-888-9-Henkel or log onto www.henkel.com/electronics.

Except as otherwise noted, all marks used herewith are trademarks and/or registered trademarks of Henkel and/or its affiliates in the US and elsewhere.